Pole pruner attachment for the MT 40 power unitRobust 20 cm chain for powerful cuttingWorking height up to 4 m with a shaft tube extensionSafe, fatigue-free work thanks to the carrying strapQuiet, emission-free and independent of the mains with the battery-operated MT 40 basic device from the Energy Flex family.
If you have the AL-KO Energy Flex MT 40 multitool, you can easily transform the basic device into a pole pruner with the AL-KO Energy Flex CSA 4020 attachment. Thanks to the tool-free quick-change system, the attachment can be attached in no time - and the pruning can begin.The high-quality 20 cm bar with cutting chain allows you to easily cut through even thicker branches without tilting, getting stuck or breaking the chain. This enables you to work overhead without getting tired and in a way that is easy on the body - supported by the carrying strap included in the scope of delivery.Thanks to the battery operation of the basic device, it is comfortable with high freedom of movement without having to worry about annoying cables. This is particularly advantageous when working overhead and on a ladder. In addition, the power unit is significantly lighter than a comparable petrol engine and allows quiet, emission-free and low-maintenance use at any time of the day.When dismantled, both the MT 40 base unit and the CSA 4020 attachment can be transported and stored in a very space-saving manner.
With a cutting length of 20 cm and a cutting thickness of 10 cm, the robust cutting chain enables you to make rapid work progress while being easy to use. The almost vibration-free, battery-powered electric motor of the latest generation also promotes precise cutting results.Thanks to the shaft extension included in the scope of delivery, you can extend the pole pruner by 70 cm and then reach a working height of up to 4 meters.With one charge of the AL-KO EnergyFlex Li-ion battery 40 V / 5 Ah in the base unit, you can achieve up to 30 Working minutes. An empty battery can be recharged in about 2 hours